Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
Victron-SmartSolar-MPPT-10050
Victron SmartSolar MPPT 100/50 (12/24V)

236,51 incl. BTW
195,46 excl. BTW

Victron-SmartSolar-MPPT-10050
Victron-SmartSolar-MPPT-10050 Victron > Victron solar laadcontrollers Victron SmartSolar MPPT 100/50 SCC110050210_victron-smartsolar-mppt-100-50_G_100 SCC125085210_Victron-SmartSolar-MPPT-250-85-Tr-2_40 SCC110050210_victron-smartsolar-mppt-100-50_G_108 SCC110030210_Victron-SmartSolar-MPPT-100-30-2_124

Victron SmartSolar MPPT 100/50 (12/24V)

Op voorraad: geleverd in 2 dagen

236,51 incl. BTW
195,46 excl. BTW

10 jaar ervaring

Meer dan 10 jaar ervaring die we graag met je delen.


Persoonlijk advies
Meer dan 5000 mensen geholpen bij zelfvoorzienend en onafhankelijk leven

Gratis verzending
vanaf €100*

In Nederland, België & Duitsland

Aangesloten bij Webwinkelkeur

Onze klanten beoordelen ons met een 9.2 gemiddeld!

Meer informatie

The first number in the product name indicates the maximum voltage that can be connected to the PV input of this controller with a (series) solar panel. The second number indicates the maximum regulator charging current at 12, 24, 36 or 48 V depending on the regulator type. There are controllers for 12/24 V, but also controllers that can also charge 36 V and 48 V battery banks (see manual).

Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. This output disconnects the load when the battery is discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected: see BatteryLife in the manual. The load output is short-circuit proof. Some loads (especially inverters) are best connected directly to the battery and the inverter remote control to the load output. You may need a special interface cable. See the manual for this.

BatteryLife: intelligent battery management If a solar charge controller cannot fully recharge the battery in one day, the result is often that the battery constantly fluctuates between ‘partially charged’ and ‘fully discharged’. This condition (not regular full charging) will irreparably damage a lead-acid battery within weeks or months. The BatteryLife algorithm monitors the battery’s state of charge and, if necessary, increases the load disconnect level slightly from day to day (disconnecting the load earlier) until the harvested solar energy is enough to drive the battery to almost full 100% to charge. From then on, the load disconnect level is modulated so that the battery is charged to nearly 100% approximately once a week.

Publieke vragen en antwoorden van de klanten

Er zijn nog geen vragen. Wees de eerste om een ​​vraag over dit product te stellen.

Stuur me een notificatie voor elk nieuw antwoord.

Onze nieuwste producten

Aanmelden voor e-mailmelding Wij sturen een e-mail wanneer het product weer op voorraad is. Vul een e-mailadres in.

Op 1 april is onze open dag

en we maken er een feestje van!

Deel je winkelwagen