Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
ITR000702001_scheidingstransformator-7000w-230v-30a_G_98
Victron scheidingstrafo 7000W 230V /32A

1.045,69 incl. BTW
864,21 excl. BTW

ITR000702001_scheidingstransformator-7000w-230v-30a_G_98
ITR000702001_scheidingstransformator-7000w-230v-30a_G_98 Victron-scheidingstrafo-7000W-230V-32A Victron scheidingstrafo 7000W 230V /32A ITR000702001_scheidingstransformator-7000w-230v-30a_G_90

Victron scheidingstrafo 7000W 230V /32A

An isolation transformer is ideal for use on boats to prevent electrolytic corrosion

Op voorraad: geleverd in 2 dagen

1.045,69 incl. BTW
864,21 excl. BTW

10 jaar ervaring

Meer dan 10 jaar ervaring die we graag met je delen.


Persoonlijk advies
Meer dan 5000 mensen geholpen bij zelfvoorzienend en onafhankelijk leven

Gratis verzending
vanaf €100*

In Nederland, België & Duitsland

Aangesloten bij Webwinkelkeur

Onze klanten beoordelen ons met een 9.2 gemiddeld!

Meer informatie

What is an isolation transformer used for?

An isolation transformer is used in 4 different applications. The first is in repair shops and electrical laboratories if the device itself is not equipped with a power transformer. The second and third applications are the prevention of unwanted flows on the primary side and shipping. Finally, it is used on a small scale indoors in a shaving socket.

Isolation transformer on boats

If a boat is connected to shore power, electrolytic corrosion will occur, unless measures are taken to prevent this. Electrolytic corrosion is the phenomenon caused by the natural potential difference between different metals.

Zinc anodes are mounted to prevent damage to propeller, propeller shaft, valves and other metal parts of a boat. In this case, the zinc is attacked instead of the other metal parts.

A shore power connection without earth and earth leakage switch is life-threatening. In case of a direct connection of the ship to shore power, all metal parts must be connected to the earth wire of the shore connection. The earth leakage circuit breaker interrupts the power supply if there is a leakage current or short circuit to the metal parts.

If there is no earth ground and earth leakage circuit breaker, electrolytic corrosion would strongly increase in such a case. The best way to prevent this is to install an isolation transformer.

The isolation transformer transfers energy to the on-board network without direct electrical contact. In the event of an electrical fault, a residual current device or a fuse will operate.

Power

This isolation transformer delivers a maximum power of 7000W. That is maximum That is maximum 32A at 230V.

Soft start

Soft start is a standard feature of the Victron Energy isolation transformer. This ensures that the power is switched on gradually so that the shore fuse is not overloaded.

Publieke vragen en antwoorden van de klanten

Er zijn nog geen vragen. Wees de eerste om een ​​vraag over dit product te stellen.

Stuur me een notificatie voor elk nieuw antwoord.

Onze nieuwste producten

Aanmelden voor e-mailmelding Wij sturen een e-mail wanneer het product weer op voorraad is. Vul een e-mailadres in.

Op 1 april is onze open dag

en we maken er een feestje van!

Deel je winkelwagen