Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
Victron BatteryProtect 48V-100A Smart
Victron BatteryProtect 48V-100A Smart
Victron BatteryProtect 48V-100A Smart

195,69 incl. BTW
161,73 excl. BTW

Victron BatteryProtect 48V-100A Smart
Victron BatteryProtect 48V-100A Smart Victron > Victron accubewaker Victron BatteryProtect 48V-100A Smart Victron BatteryProtect 48V-100A Smart Victron > Victron accubewaker Victron-BatteryProtect-48V-100A-Smart-1 BPR110048000_Victron-Smart-BatteryProtect-48V-100a_86 Optimized_Optimised_LoRes_Battery-Protect-BP-100_front_web_86 BPR110048000_Victron-Smart-BatteryProtect-48V-100a_94 Optimized_Optimised_LoRes_Battery-Protect-BP-100_front_web_94

Victron BatteryProtect 48V-100A Smart

Op voorraad: geleverd in 2 dagen

195,69 incl. BTW
161,73 excl. BTW

10 jaar ervaring

Meer dan 10 jaar ervaring die we graag met je delen.


Persoonlijk advies
Meer dan 5000 mensen geholpen bij zelfvoorzienend en onafhankelijk leven

Gratis verzending
vanaf €100*

In Nederland, België & Duitsland

Aangesloten bij Webwinkelkeur

Onze klanten beoordelen ons met een 9.2 gemiddeld!

Meer informatie

This 48V version of the Smart BatteryProtect 100A protects the battery from excessive discharge and can be used as an on / off switch system. For this 100A model, the maximum continuous current is 100A and the peak current (for 30 seconds) is 250A with an operating voltage range of 24 – 70V. The battery is disconnected from non-essential loads before the battery is fully discharged (which would damage the battery) or before there is insufficient power left to start the engine. The input / output can be used as an on / off switch system.

Bluetooth: simple programming

When using Bluetooth to program the Smart BatteryProtect, all required power on / off levels can be set. Alternatively, one of the nine predefined start / stop levels can be set with the programming pin (see manual). If necessary, Bluetooth can be turned off.

A special setting for lithium-ion batteries

In this mode, the BatteryProtect can be controlled by the VE.Bus BMS. Note: The BatteryProtect can also be used as a charge interrupter between a battery charger and a Li-ion battery. See connection diagram in the manual.

Super low power consumption

This is important in the case of lithium ion batteries, especially after a low voltage shutdown. See our Li-ion battery datasheet and VE.Bus BMS manual for more information.

Overvoltage protection

In order to prevent damage to sensitive loads due to overvoltage, the load is disconnected as soon as the DC voltage exceeds 16V and 32V respectively.

Protected against ignition

No relays, but MOSFET switches and therefore no sparks.

Delayed alarm output

The alarm output is activated if the battery voltage falls below the preset disconnect level for more than 12 seconds. Therefore, starting the engine does not trigger the alarm. The alarm output is an open collector short circuit proof output connected to the negative (min) rail, max current 50mA. The alarm output is generally used to activate the buzzer, an LED or relay.

Delayed load disconnect and delayed reconnection

The load is disconnected 90 seconds after the battery voltage has fallen below the preset level. If the battery voltage rises back to the clutch threshold within this time frame (after starting the engine, for example), the load will not be disconnected.The load will be reconnected 30 seconds after the battery voltage has risen to more than the preset reconnect voltage.

Publieke vragen en antwoorden van de klanten

Er zijn nog geen vragen. Wees de eerste om een ​​vraag over dit product te stellen.

Stuur me een notificatie voor elk nieuw antwoord.

Onze nieuwste producten

Aanmelden voor e-mailmelding Wij sturen een e-mail wanneer het product weer op voorraad is. Vul een e-mailadres in.

Op 1 april is onze open dag

en we maken er een feestje van!

Deel je winkelwagen