Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
Incl/Excl
Selecteer BTW weergave
  • Inclusief BTW
    Geef alle prijzen inclusief BTW weer
  • Exclusief BTW
    Geef alle prijzen exclusief BTW weer
  • BTW Vrijgesteld
    BTW weergave afhankelijk van vrijstelling voor particulieren
    Meer informatie ›
BAM010700100-Victron-Batterij-monitor-BMV-700H_1
Victron Batterij monitor BMV-700H

683,12 incl. BTW
564,56 excl. BTW

BAM010700100-Victron-Batterij-monitor-BMV-700H_1
BAM010700100-Victron-Batterij-monitor-BMV-700H_1 Victron Batterij monitor BMV-700H Victron Batterij monitor BMV-700H Victron-Batterij-monitor-BMV-700H BAM010700100_Victron-Batterij-monitor-BMV-700H_77 BAM010700100_Victron-Batterij-monitor-BMV-700H-2_85 BAM010700100_Victron-Batterij-monitor-BMV-700H_93 BAM010700100_Victron-Batterij-monitor-BMV-700H-2_81 BAM010700100_Victron-Batterij-monitor-BMV-700H-2_93

Victron Batterij monitor BMV-700H

Op voorraad: geleverd in 2 dagen

683,12 incl. BTW
564,56 excl. BTW

10 jaar ervaring

Meer dan 10 jaar ervaring die we graag met je delen.


Persoonlijk advies
Meer dan 5000 mensen geholpen bij zelfvoorzienend en onafhankelijk leven

Gratis verzending
vanaf €100*

In Nederland, België & Duitsland

Aangesloten bij Webwinkelkeur

Onze klanten beoordelen ons met een 9.2 gemiddeld!

Meer informatie

Battery ‘fuel gauge’, time remaining indicator and much more The remaining battery capacity depends on the ampere hours consumed, the discharge current, the temperature and the age of the battery. Complex software algorithms are required to account for all these variables.
In addition to the main display options such as voltage, current and ampere hours consumed, the BMV-700 series also displays charging status, time remaining and power consumption in watts.
The BMV-702 has an additional input that can be programmed to measure voltage (or a second battery), temperature or midpoint voltage (see below).
Bluetooth Smart Use the Bluetooth Smart dongle to monitor your batteries with Apple or Android smartphones, tablets, macbooks and other devices.
Easy to install All electrical connections are made with the quick disconnect PCB on the power shunt. The shunt is connected to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10m) and battery cable with fuse (2m); no further parts are needed. Also included are a separate front bezel for a square or round display appearance, a retaining ring for rear mounting, and screws for front mounting.
Easy to program (with your smartphone!) A quick installation menu and a detailed setup menu with scrolling text assists the user through the various settings. You can also opt for the quick and easy solution: download the smartphone app (Bluetooth Smart dongle required)
Midpoint voltage monitoring (BMV-702 only) This feature, commonly used in the industry for monitoring large and expensive battery banks, is now being made available at a low cost for the first time, so that any battery bank can be monitored. A battery bank consists of a series of cells connected in series. The midpoint voltage is the voltage halfway through this sequence. Ideally, this midpoint voltage is exactly half of the total voltage. In practice, however, deviations occur that depend on many factors, such as different charge status for new batteries or cells, different temperatures, internal leakage currents, capacities and much more. Large or increasing deviations from the midpoint voltage indicate improper maintenance of the battery or a defective battery or cell. Corrective action after a midpoint voltage alarm can prevent serious damage to an expensive battery. For more information, see the BMV manual. Standard properties
– Battery voltage, current, power, ampere hours consumed and state of charge
– Time remaining at current discharge rate
– Programmable visual and audible alarm
– Programmable relay to turn off non-critical loads or to run a generator when needed.
– 500 A shunt with quick disconnect and connection kit
– Shunt option up to 10,000 amperes
– VE.Direct communication port
– Can store a large number of historical events that can be used to evaluate usage pattern and battery condition
– Wide input voltage range: 9, 5 – 95V – High current measurement resolution: 10 mA (0.01A)
– Low power consumption: 2.9 Ah per month (4 mA) at 12V and 2.2 Ah per month (3 mA) at 24V
Additional features of the BMV-702 Additional input for voltage measurement (from a second battery), temperature or midpoint voltage and associated alarm and relay settings.
BMV-700HS: voltage range from 60 to 385 VDC No additional parts required. Note: Suitable for systems with grounded negative pole only (battery monitor is not isolated from shunt).
Other battery monitoring options
– VE.Net battery controller
– Lynx Shunt VE.Net
– Lynx Shunt VE.Can
More about midpoint voltage One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. See the BMV manual, section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize the life span of series-connected batteries.

Publieke vragen en antwoorden van de klanten

Er zijn nog geen vragen. Wees de eerste om een ​​vraag over dit product te stellen.

Stuur me een notificatie voor elk nieuw antwoord.

Onze nieuwste producten

Aanmelden voor e-mailmelding Wij sturen een e-mail wanneer het product weer op voorraad is. Vul een e-mailadres in.

Op 1 april is onze open dag

en we maken er een feestje van!

's Ochtends

zijn er lezingen, workshops en activiteiten met een
technische achtergrond

's Middags

zijn er lezingen, workshops en activiteiten in het kader van 
off-grid leven.

Deel je winkelwagen